Postpuncher Range
POSTPUNCHERS
A bright steel driving weight enclosed in a steel tube to allow safe operation in any conditions. A forward mounted capability. Postpunchers can be fitted to any tractor front-end loader, telehandler, skidsteer or back hoe. Postpunchers allows operators to drive posts in at angles of 45 degrees and upwards.
The Postpunchers significant safety feature is from the weight being enclosed, this along with its new designed adapter adds to the machines excellent versatility, enabling posts of all sizes to be driven in by the same parent machine.
Postpuncher Model : PP1
Size of Posts : Up to 6 inch round.
Up to 4x4inch square.
Parent Machine : To fit 1.5t excavator and above.
Please contact your dealer or us on the number opposite for further information.
Postpuncher Model : PP2
Size of Posts : 8 inch round
6 x 5 inch Square
Parent Machine : Excavator from 2.5t .
Please contact your dealer or use the contact form for further information.
Postpuncher Model : PP2L Longer drop and heavier weight options.
Size of Posts : 8 inch round
6 x 5 inch Square
Parent Machine : Excavator from 2.7t .
Please contact your dealer or us on the number opposite for further information.
Postpuncher Model : PP3
Size of Posts : 11 inch round
8inch X 8inch square
Parent Machine : Excavators from 5t .
Please contact your dealer or use the contact form for further information.
Specifications |
||||||
Model |
|
|
|
Hammer weight from |
Tube length |
Overall |
PP1 |
|
|
|
75kg |
2000mm |
145kg |
PP2 |
|
|
|
120kg |
2000mm |
230kg |
PP2L |
|
|
|
150kg |
3000mm |
295kg |
PP3 |
|
|
|
250kg |
3000mm |
435kg |
Remember! A bigger weight is only effective once it has reached its maximum drop speed & distance.
The POSTPUNCHER makes every hit count by falling the same distance every time.
POSTDRIVERS
We have designed the Postdriver as a cost effective alternative to the Postpuncher. The Postdriver was designed for the smallholder and compact tractor, but is also capable of being
fitted to mini excavators and skidsteers. The postdriver has a driving weight of 80kg and has a slambox which incorporates a cage which encloses the driving weight. It has the capacity to knock
in round posts up to 8 inches (200mm) or square posts up to 7 x 7 inches and has a pin that holds 5 x 3 posts from twisting while being driven. Other driving weights are available, also left and
right tilt, forward and back tilt and can be manufactured to the customers requirements.